100l tank for clean or grey water with preformed filling spout

Description

Tank for clean or grey water with Ø12 cm cleaning spout, 100l. The filling spout is preformed. The tank is made of impact resistant, food grade polythene. Can be mounted inside or outside the vehicle. It has 4 fixing lugs (screws not included)

Specifications:

Dimensions: 93 x 48 x 26,5 cm.

Pre-formed holes: 1 x Ø 40 mm; 1 x Ø 10 mm, 1 x 1/2 metal thread, 1 x Ø 120 mm

ATTENTION !!! Due to the special dimensions and/or gauge this article has a fixed delivery charge of 25 RON

The filling of the tank is generally done through a filling nozzle mounted on the outside of the vehicle and connected to the water tank through a flexible hose with a diameter of 40mm. The flexible hose can be attached to the water tank directly to the pre-formed filler spout or by making a new filler spout using the desired supply rods.

The water is extracted from the tank using a submersible or external water pump using a 10 or 12mm internal diameter hose. The hose is attached to the water tank using one of the following stut variants:

You can order the supply nozzles here

You can find the hose nozzles, connectors and other accessories needed to connect to the water supply here