Alugas refillable LPG tank, made of aluminium with a multi-valve and fill level indicator, 27/22 l

Description

LPG tank with multi-valve and fill level indicator. This model has the same diameter as a standard 11kg cylinder (300 mm) and can be fitted in its place and filled with LPG at any filling station in Romania or across Europe. In most European countries, refuelling with LPG is only permitted using special LPG cylinders or tanks that are ECE 67R-01 approved. The certificate of conformity for Alugas tanks can be downloaded from https://alugas-service.de/alugas.php by entering the tank’s serial number.

Refuelling can be carried out:

• directly into the cylinder using an extension hose and adaptors for Romania (DISH), the Netherlands (bayonet), Germany (ACME) or Spain (Euronozzle), which must be purchased separately. 
• via the filling port (not included in the package), which can be fitted to the service door and purchased separately here

What is the difference between standard gas cylinders and refillable ones? The CAMPKO refillable LPG cylinder is fitted with an overfill protection mechanism that prevents overfilling by limiting it to 80 per cent of the total capacity. If the cylinder is filled beyond this level, under certain conditions (e.g. excessive heat) there is a risk that the liquefied gas inside may expand and damage the valves, taps, filters, etc., or even cause an explosion. It is not possible to control the 80 per cent safety level in the case of a standard cylinder that is filled with LPG manually.

In addition to the overfill protection mechanism, the ALUGAS cylinder/tank is fitted with a safety valve designed to open at a pressure of 27 bar.

PLEASE NOTE!!! Due to its size and special dimensions, this item is subject to a flat-rate delivery charge of 25 RON

Specifications:

• Gross volume capacity: 27.2 l / net volume 21.76 litres (= 80%)
• Height including collar: 597 mm
• Height excluding collar (top edge of valve): 557 mm
• Diameter: 300 mm
• Material: aluminium
• Overfill valve: yes, limits to 80 per cent of nominal capacity
• Safety valve: yes, max 27 bar
• Weight (without gas): 6.6 kg
• Fill level indicator: yes (pressure gauge, based on gas pressure)
• LPG inlet: 3/4-16 UNF (right-hand thread)
• LPG outlet: G12 (W21.8 x 1/14 left-hand thread) GERMANY cylinder type (for G12 pressure hose, which can be purchased here from Truma or here)
• Complies with standard EN 13110:2012