LiFePO4 battery, 12.8V, 100Ah with BMS and self-heating, 5000 cycles, class A cells

Description

The LiFePO4 battery, 12.8V, 100Ah with BMS is designed for solar systems with a nominal voltage of 12V.

Key features of this model are:

• COSUPER batteries containcategory "A" cells. Information about this cell typecan be found here
• BMS (Battery Management System): integrated battery charge management and control system that protects the battery against overcharging, overvoltage and overheating via the "Xiaoxiang" app (Android or IOS) which can be downloaded online.

• Bluetooth monitoring: on your smartphone via the free app (Android or IOS) "Xiaoxiang" which can be downloaded online. With this app you have all key battery parameters displayed in real time
• Auto warming: start <5℃, stop 10℃; 15mins. COSUPER's battery self-heating system automatically activates at temperatures of 5°C when connected to an external electricity source of min 3A/12V (e.g. solar panel or mains charger) and heats the battery up to a level of 10°C, thus maintaining the battery's ability to charge or generate current. Without self-heating, for protection, the LiFePO4 battery's BMS system disconnects the LiFePO4 battery from the charging source at 0°Cto protect the integrity of the cells. Once the battery warms up, the BMS restarts charging.
• 5000 charge / discharge cycles (guaranteed for 80% capacity)
• 4 COSUPER batteries can be connected in parallel. The connection cables between the batteries are recommended to have a minimum diameter of 25mm² and a maximum length of 0.5 m. Connection cable can be purchased separately here
• Instructions for use can be downloaded here

Specifications:

Rated voltage: 12.8V(11.4~14.4V)
Life cycle5000@80%D.o.D
Rated capacity: 100Ah
Power: 1280Wh
Discharge efficiency: >99%
Continuous discharge current: 0 - 100A

Recommended charging current: 20 - 50A / Maximum charging current: 50A
Recommended charging voltage: 13.6 - 14.2V

Over-discharge protection: 110A @ 8 sec
Overcharge protection: 14,4V
Low voltage disconnection: 10.4V
Reconnect voltage: >12.2 V

Dimensions (L x W x H): 280 x 213 x 228.5 mm
Weight: 12,9 kg
Housing material: ABS
Certifications: IEC62368-1:2020+A11:2020 / EN IEC 61000-6-3:2021 / IEC 62619:2022

ATTENTION !!! It is necessary to use a LiFePO4 battery charger ! Chargers for Gel, AGM or lead-acid batteries are NOT compatible (will overheat the battery). If charging with solar panel regulator/inverter, it must be compatible with Lithium / LiFePO4 batteries