One Beam Air inflatable awning for caravans, length 325 cm, including the caravan skirt

Description

One Beam Air compact inflatable tent, length 325 cm. It attaches only to the top horizontal section of the rail and is approximately 325 cm long (a minimum horizontal rail length of 3.30 m is required)

• The awning has a single inflatable support pole and is extremely easy to fit. It includes a metal pole for tensioning the roof and two poles for the area where it meets the caravan wall.
• The package includes a caravan skirt.
• It has three entrances. Both side doors, as well as the large front door, are fitted with mosquito netting and transparent windows. The front door can be used as a sunshade.
  
• You can download the installation manual here

Specifications:

• Installation height H (from – to): 235 – 250 cm
• Length: 325 cm
• Depth (opening): 250 cm
• Surface area (width x depth): 325 x 250 cm
• Material: 185T polyester, metal
• Caravan skirt material: polyester
  
• water column resistance: 3,000 mm
• Package contents: tent, caravan skirt, air pump, pegs and guy ropes, metal pole for internal
  tensioning

• The 325 cm wide awning has an additional roof frame (air tube) for greater stability and to prevent the formation of air pockets.

The maximum length of an awning or partial tent must be equal to the length ‘L’ (= the straight horizontal length of the rail) shown in the image below, for both standard and aerodynamic caravans. Ideally, you should purchase an awning with length L2 to avoid the vertical edge of the awning blocking the window.

For both awnings and partial awnings, you must also measure the height ‘H’ from the ground to the horizontal part of the rail. This must fall within the awning supplier’s specifications, namely 235–250 cm for the ‘Lynx’ awning.