SikaPower 2900 Primer for improving adhesion on plastic substrates

Description

SikaPower®-2900 Primer is fast drying and is used to improve adhesion on a wide range of different plastic substrates.

Specifications:

Colour: colourless
Quantity: 200 ml
Application temperature: 5 ─ 40 °C
Application method: spray
Consumption (depending on substrate porosity): 20 ml/m2
Drying time: minimum / maximum: 5 minutes / 2 hours
Shelf life: 36 months
Storage: sealed, vertical, in a dry place at ≤ 25 °C

Application:

Surfaces must be clean, dry and free from grease, oil, dust and contaminants.
Apply a thin, even coat to the surface in short bursts to avoid dripping or run-off of the primer
Ideal application and surface temperature is between 15 °C and 25 °C.
SikaPower®-2900 Primer should only be applied once.
If the pre-treated area is not bonded within the maximum evaporation time, the activation process must be repeated (once only).